A 90⁰ electrofusion elbow is used to join two lengths of poly pipe on an angle of 90 degrees. Electrofusion elbow 90⁰ fittings are also used to join a long spigot fitting to a piece of pipe around a 90⁰ corner. With a size range from 20 mm to 315mm, electrofusion elbow fittings come in SDR 11. Electrofusion elbows are rated to PN16 water and 1000 kPa gas. Electrofusion elbow fittings are made from PE100 material with a precisely moulded energizing coil of wire, ensuring uniform melting for a strong electrofusion joint and the minimization of welding and cooling times. 90⁰ elbow electrofusion fittings are suitable for use for HDPE pipe, and welded with an electrofusion pressure welder. 90⁰ electrofusion elbow PE fittings may also be known as an electrofusion elbow joiners or EF elbow pipe joiners. 90⁰ Electrofusion Elbow Fittings available: 20 mm electrofusion 90⁰ 25 mm electrofusion 90⁰ 32 mm electrofusion 90⁰ 40 mm electrofusion 90⁰ 50 mm electrofusion 90⁰ 63 mm electrofusion 90⁰ 75 mm electrofusion 90⁰ 90 mm electrofusion 90⁰ 110 mm electrofusion 90⁰ 125 mm electrofusion 90⁰ 160 mm electrofusion 90⁰ 180 mm electrofusion 90⁰ 200 mm electrofusion 90⁰ 225 mm electrofusion 90⁰ 250 mm electrofusion 90⁰ 280 mm electrofusion 90⁰ 315 mm electrofusion 90⁰